产品中心
(英文)耐高温二硫化钼喷剂
1.产品名称:耐高温二硫化钼润滑喷剂
2.产品编号:CS-102
3.产品品牌:“CSHPON”品牌
4.生产单位:在邦OEM基地
5.耐温区间:-180℃~500℃
6.产品规格:500ML
7.产品特性: 耐高温、润滑、耐磨、清洁 
8.产品包装:500ML/罐;24罐/件
9.中性包装:可根据客户使用要求加工
10.联系电话:021-20955711
网上店铺在线订购
  • 产品说明书
  • 产品MSDS
  • 执行标准
  • 文献资料

一. Product characteristics
1. have good thermal stability, anti - polarity, anti - rust and lubricating performance, strong adhesion.
2. attached to the metal surface to form a dense protective film and lubricating film, play a good role in protection and lubrication.
3. resistance to temperature range, low temperature resistance -180, the best temperature -80 ~ 500, intermittent temperature 600.
4. product technology, quality and stability, cost-effective, easy to carry, easy to use.
5. this product does not contain CFCs solvent material, not easy to cause damage to the skin, to meet the requirements of environmental protection.
二. Use scope
1. pre assembly process: spray on the surface of the assembled parts to form a thin layer of lubrication, not to change the fit tolerance. Such as: gear, mechanical assembly, mold assembly, power generation, such as induction, steam generator, etc..
2. Protective film: suitable for assembly parts and internal lubrication, chains, wire ropes, screws, conveying belt, pull cable machine, metal casting machine, washer outer membrane, equipment repair and maintenance and high temperature operation instrument, rubber mold release and glass processing.
3. High temperature lubricant: molybdenum disulfide in high temperature under reduced pressure or even higher) can still dry lubrication, applicable to steel, textile machinery maintenance industry. Dry lubricant is widely used in the steel industry as high temperature lubricant.
4. lubrication performance: in the case of excessive dust can provide dry lubrication. Used for lubrication and protection in mining of thick hook and textile machinery automatic winding machine, heat setting machine screw, stenter setting machine, dyeing machine, steaming machine, drying machine, spinning machine, printing machine, mercerizing machine bearing lubrication.
5. cutting tools: dry lubricant applied to cutting tools, can get the best benefits. The surface of the cutter block mark in the lack of MoS2 will enable the cutting machine to maximize the effect of.
6. plastic surface: spraying plastic on the surface more emergent product advantages such as nylon, bearing.
7 Application in the opening of the rotating drive and the dual surface between the need to lubricate, reduce friction.
三. Use method
1. before use, first the object surface oil thoroughly clean, and then the tank body force to shake for about 3 minutes, in favor of the spray uniformity.
2. spraying, the nozzle from the surface of the workpiece surface about 20CM or so, a parallel movement, not fixed in a position spray, a short time can be expressed in dry, hard working time and environmental temperature.
3. after use, reverse the tank body spray 1 to 2 times, about 2 seconds, the role is to wash the nozzle, to prevent the plug nozzle.
4. when using the product specification should be detailed, and the use of professional guidance.

点击下载